Ribs & Scrapers

Garrity Mushroom Anvil - click GARRITY ANVILSfor these new anvils and more!

MKM Tools - click MKMfor the whole line of ribs, stamps & tools

Mud Tools - click MUD TOOLSfor Sherrill Mud ribs and scrapers

Pot Lifting Tools - click POT LIFTER tools to lift your pots off the wheel easily!

Princeton Silicone Tools - click PRINCETONfor Princeton ribs & tools - 30% off MSRP!

Shimpo Tools - click SHIMPOfor Shimpo gyobera ribss & throwing sticks

Wiziwig - click WIZIWIG RIBS for Wiziwig ribs

Xiem Tools - click XIEM TOOLSfor Xiem ribs, cutters, and other useful tools

Economy Wooden Ribs

POT8 • Set of 5 Ribs Buy 1-5 ... 6-11 ... 12+ ... $9.99 ea $8.00 ea $7.00 ea Qty:

Kemper Rubber Ribs

Quantity discounts apply on multiples of the same tool

	FRSS Soft 3-1/8" wide Buy 1-5 ... 6-11 ... 12+ ... $5.99 ea $4.79 ea $4.19 ea Qty:
	FRSM Hard 3-1/8" wide Buy 1-5 ... 6-11 ... 12+ ... $6.35 ea $5.08 ea $4.45 ea Qty:
	FRSO Soft 4-1/4" wide Buy 1-5 ... 6-11 ... 12+ ... $7.15 ea $5.72 ea $5.01 ea Qty:
	FRH Hard 4-1/4" wide Buy 1-5 ... 6-11 ... 12+ ... $7.05 ea $5.64 ea $4.94 ea Qty:

Kemper Scrapers

Quantity discounts apply on multiples of the same tool

	S1 • Steel Scraper 4-5/8" (flexible) Buy 1-5 ... 6-11 ... 12+ ... $3.15 ea $2.52 ea $2.21 ea Qty:
	S3 • Steel Scraper 4" (flexible) Buy 1-5 ... 6-11 ... 12+ ... $3.25 ea $2.60 ea $2.28 ea Qty:
	S4 • Steel Scraper 3-7/8" (flexible) Buy 1-5 ... 6-11 ... 12+ ... $3.19 ea $2.55 ea $2.23 ea Qty:
	S6 • Steel Scraper 4" (flexible) Buy 1-5 ... 6-11 ... 12+ ... $2.90 ea $2.32 ea $2.03 ea Qty:
	S10 • Toothed Steel Scraper 3-1/4" (flexible) Buy 1-5 ... 6-11 ... 12+ ... $3.59 ea $2.87 ea $2.51 ea Qty:
	S11S • Sawtooth Steel Scraper 6" (flexible) Buy 1-5 ... 6-11 ... 12+ ... $4.89 ea $3.91 ea $3.42 ea Qty:
	S12 • Steel Scraper 6" (flexible) Buy 1-5 ... 6-11 ... 12+ ... $4.89 ea $3.91 ea $3.42 ea Qty:
	SA4 • Smooth Aluminum Scraper 3-7/8" (rigid) Buy 1-5 ... 6-11 ... 12+ ... $3.55 ea $2.84 ea $2.49 ea Qty:
	SA10 • Toothy Aluminum Scraper 3-7/8" (rigid) Buy 1-5 ... 6-11 ... 12+ ... $3.99 ea $3.19 ea $2.79 ea Qty:

Xiem Steel Ribs

These stainless steel clay ribs are flawless, flexible, and the finest steel ribs available. Tailored for all your shaping, trimming, cutting, smoothing and finishing needs on leather, water-based and oil-based plastalines, Polymer clays, waxes, plaster, and of course - clays. Both ribs are 5.2" long x 1.7" wide.

	SSR1A • $3.25 (2.4" x 1.2") Smooth Steel Rib Qty:
	SSR1B • $4.25 (2.8" x 1.4") Smooth Steel Rib Qty:
	SSR1C • $4.25 (4" x 1.8") Smooth Steel Rib Qty:
	SSR2A • $3.25 (2.4" x 1.2") Smooth Steel Rib Qty:
	SSR2B • $4.25 (3" x 1.4") Smooth Steel Rib Qty:
	SSR2C • $4.25 (4" x 1.8") Smooth Steel Rib Qty:
	SSR3A • $3.25 (2.4" x 1.2") Smooth Steel Rib Qty:
	SSR3B • $4.25 (3" x 1.4") Smooth Steel Rib Qty:
	SSR3C • $4.25 (4" x 1.8") Smooth Steel Rib Qty:
	SSR4A • $4.25 (5.2" x 1.7") Serrated Steel Rib Qty:
	SSR4B • $4.25 (5.2" x 1.7") Smooth Steel Rib Qty:

Van Guilder Wood Rib

Bill Van Guilder, a master potter and host of DIY network's & Throwing Clay" series has been designing and refining pottery toools for the last 30 years. Bill says ... "Produce an instant rounded foot profile by pushing this easy-to-use tool into the base edge of a wet pot on the wheel. You can create an interesting scalloped foot profile by rhythmically pressuring the tool into the base edge of your slowly spinning form. Using the cornered point of the tool, add some decorative lines to complete your foot treatment. Pull it along the foot of a slab-based form to securely attach the wall to the base. And, at the same time, create an even, rounded, smooth foot edge - all in one step! Each tool has two rounded foot profiles and an easy-to-grip center hole." Made of hardwood.

Kemper Wooden Ribs

Quantity discounts apply on multiples of the same rib

	RB00 • Double "0" Rib 12" Buy 1-5 ... 6-11 ... 12+ ... $16.25 ea $13.00 ea $11.38 ea Qty:
	RB1 • 4-1/8" Buy 1-5 ... 6-11 ... 12+ ... $7.69 ea $6.15 ea $5.38 ea Qty:
	RB2 • 4-1/4" Buy 1-5 ... 6-11 ... 12+ ... $6.95 ea $5.56 ea $4.87 ea Qty:
	RB3 • 4-1/4" Buy 1-5 ... 6-11 ... 12+ ... $6.49 ea $5.19 ea $4.54 ea Qty:
	RB4 • 3-1/2" Buy 1-5 ... 6-11 ... 12+ ... $7.35 ea $5.88 ea $5.15 ea Qty:
	RB5 • 5-3/4" Buy 1-5 ... 6-11 ... 12+ ... $9.54 ea $7.63 ea $6.68 ea Qty:
	RB6 • 4-1/8" Buy 1-5 ... 6-11 ... 12+ ... $8.19 ea $6.55 ea $5.73 ea Qty:
	RB7 • 4" Buy 1-5 ... 6-11 ... 12+ ... $7.05 ea $5.64 ea $4.94 ea Qty:
	RB8 • 5-3/4" Buy 1-5 ... 6-11 ... 12+ ... $8.55 ea $6.84 ea $5.99 ea Qty:

Garrity Wood Ribs

	GTA4 • $14.40 3" - Inside vessel shaping & then flip for shaping the rim	Qty:
	GTB3 • $14.40 3.5 x 1.5" - Pointed tip, curves and straight lines	Qty:
	GTC1 • $14.40 Circle Rib 2.5" across	Qty:
	GTC3 • $14.40 Circle Rib 3" across	Qty:
	GTC4 • $16.80 Circle Rib 3.75" across	Qty:
	GTF4 • $24.00 10.75 x 2.5" Rib with 2 sides for plates and tall vessels	Qty:
	GTI1 • $16.80 6.75 x 2.75" Rib for tall vessels, sculpting or plate making	Qty:
	GTI5 • $14.40 5 x 2.5" Location Pin Rib with sharp point	Qty:
	GTK1 • $14.40 3 x 2" Kidney Rib used inside & outside of mugs & sculpting	Qty:
	GTN1 • $16.80 7.25 x 1.75" Rib with all the Long, sharp, and angled for shaping straight and smooth walls. Both 90° and 45° angles.	Qty:
	GTN3 • $14.40 3.5 x 3" Rib with all the right angles	Qty:
	GTO6 • $14.40 4.75 x .75" Rib perfect for inside bowls or plates	Qty:
	GTR1 • $14.40 4 x 2.25" Teardrop Rib perfectly shaped for most needs	Qty:
	GTS2 • $14.40 4 x 2.5" Concave end and sharp tip for rounded forms, shaping & trimming	Qty:
	GTT1 • $16.80 8.75 x 1.5 " Knife Rib easy to hold & resharpen with sandpaper	Qty:
	GTT5 • $14.40 5.25 x 2.5" Classic Rib with straight and curved sides	Qty:
	GTT6 • $19.20 8.5 x 2.5" Long Rib w/a long straight edge and smooth curve	Qty:
	TEXTURE1 • $19.20 Small and medium waves for project's walls or pointed curves on other side. 3.25" x 3.25"	Qty:
	TEXTURE2 • $19.20 Small and medium pointed ridges that are either deep or shallow. 3.25" x 3.25"	Qty:
	TEXTURE3 • $19.20 Convex and concave curves for medium or large ridges or valleys. 3.25" x 3.25"	Qty:
	TEXTURE4 • $19.20 Distinct peaks and valleys for a subtle wave and ridge pattern. 3.25" x 3.25"	Qty:
	TEXTURE5 • $19.20 The long edges - great for pulling up walls, or short textured ends - scoring & decoration. 9" x 1.25"	Qty:
	TEXTURE6 • $19.20 Squared ridges with four sizes to create geometric textures with precision. 3.5" x 3.25"	Qty:
	TEXTURE7 • $19.20 Soft waves in small, medium, and large sizes. Great for wheel and handbuilding designs. 3.5" x 3.25"	Qty:
	TEXTURE8 • $19.20 Soft points in 4 sizes of ridges for a more natural ebb and flow in your design work. 3.75" x 2.75"	Qty:
	TEXTURE9 • $19.20 4 different, perfectly round ridges for the walls of your vessels that can be connected all around. 3.5" x 3"	Qty:
	TEXTUREMICRO • $19.20 4 different tiny ridges and hills for the walls of your vessels and handbuilding designs. 3.5" x 3.25"	Qty:
	FOOT2 • $16.80 The curve makes it easy to support or avoid walls while creating a foot. Flat bottom allows steady control against your bat while spinning. Great as a rib plus a straight edge. 4.5" x 1.5"	Qty:
	UNFOOT • $21.60 Flat sides end with a corner point on one side and a curve on the other - you can undercut your clay while maintaining the shape of your walls. This means less trimming for you! 3.75" x 3.25"	Qty:
	UNFOOT2 • $21.60 Curved sides with a corner point and a small flat edge on the other for the same undercut features so you maintain the shape of your walls. Less trimming! 4.25" x 3.25"	Qty:
	COMB • $14.40 Sturdy handle and consistent teeth make it great for scoring or adding texture lines to the surface of any project. Comfortable, beautiful, and practical at 3.25" long x 1.75" wide.	Qty:
	FISHSTICK • $14.40 4 different corner profiles and flat sides help you compress and pull the clay. Keep projects clean, centered & smooth down to the inside corners. Versitile & handy at 5" x 1.75".	Qty:
	COMPASS • $14.40 Cut 14 sizes of circles from 1" to 7" in diameter. Use two needle tools on a slab of clay. The pointed tip, flat sides, and rounded end are handy on the wheel. 4.75" x 1.125".	Qty:
	COMPASSXL • $17.00 Cut 24 sizes of circles from ½" to 12" in diameter. Use two needle tools on a slab of clay. The pointed tip, flat sides, and rounded end are handy on the wheel. 7" x 1.125".	Qty:
	GTCS • $29.00 The Classroom set for beginners! Use Square (4.5" x 2") for cylinders, the Knife cuts & scrapes (6.5" x .75"), Round for sides of bowls (3.5" x 2.5"), and Foot (4.5" x 1.5") to trim & shape.	Qty:

Plastic Scrapers

These simple tools illustrate the idea that just about anything you can hold in your hand can be a tool for working with clay. These are basic kitchen tools, often used for baking and frosting, that have found a new lease on life!

	FR5724 • $7.50 Stainless Steel Flat Cutter Qty:
	FR5340 • $2.00 Plastic Bowl Scraper/Rib Qty:
	FR4357 • $8.95 Triangle Texture Comb Made of Aluminum, in Portland, OR! Qty:

	FS02 • $2.50 Plastic Texture Scraper - set of 3 Qty:
	FS04 • $2.50 Plastic Texture Scraper Rectangle Qty:
	FS11 • $2.50 Plastic Texture Scraper Square Tooth Qty:

Ultimate Edgers

Available in two sizes to fit all your work, the Ultimate Edger is six edging tools in one convenient shape. It's made of stainless steel so it will last forever ... or close enough.

UE1 • $15.99 Small Qty: UE2 • $17.99 Large Qty:

All contents related to Georgies' products copyright 2024. All rights reserved.
Georgies Ceramic & Clay Co. • 756 NE Lombard • Portland OR 97211 • 503.283.1353
Georgies of Eugene • 1471 Railroad Blvd #9 • Eugene OR 97402 • 541.338.7654
Fax numbers: Portland 503.283.1387 • Eugene 541.338.7565
Portland Store Hours: Monday-Friday 9:00a-5:00p Pacific time • CLOSED Saturday & Sunday
Eugene Store Hours: Tuesday-Friday 10:00a-5:00p • Saturday 10:00a-4:00p Pacific time • CLOSED Sunday & Monday